top of page

Accessories

Pump Accessories, Tubing, Connectors, Adapters, Sample Reservoirs and Biochip Microscope Frames

Back to top

For most up-to-date information on all our Accessories:

Inish Analyser Accessories

INISH ANALYSER ACCESSORIES

Sample and Waste tubes.jpg
Sample & Waste Tubes

Standard Tubes
500 µL

500 each/pk

Read More
Inish Analyser Buffer (1).jpg
Inish Analyser Buffer

Label-free
cell analysis
No dyes / no stains

Fast Set-up & Analysis - 90 seconds including sample prep.

Compatible with wide variety of cell types.

250 assays/bottle.

Read More
Inish Cleaning Fluid (1).jpg
Inish Cleaning Fluid

Easy to use
Simple maintenance of Inish Analyser

Fast - 60 seconds to run a wash.

250 assays/bottle.

Read More
Inish Analyser Calibration Kit (1).jpg
Inish Calibration Kit

Easy to use
Check Inish Analyser is calibrated

Fast - 90 seconds to run a calibration assay.

100 assays/kit.

Read More
Biochip Microscope Frames

BIOCHIP MICROSCOPE FRAMES

Micro-environmental Chamber with controller (7).jpg
Microenvironmental Chamber

Temperature controlled microscope frame

Heat your biochips

Heated frame and ITO glass heater to heat surface of microfluidic biochip.

Compatible with Cellix's biochip range.

Compatible with a wide range of microscopes (Zeiss, Nikon etc.).

Read More
Biochip Microscop Frame_K.PNG
Biochip Microscope Frame (K)

Non-heated

For manual & motorized microscope stages

Compatible with Cellix's biochip range.

Compatible with Nikon* manual-stage microscopes and motorized stages (Prior, Marzhauer, Ludl).

Includes frame base, top cover and Eppendorf holder.

Frame material is anodized aluminium.

​

*Nikon manual stage is flat with a circular section.  Frame K sits on top of stage but is not clamped.

Read More
Biochip Microscope Frame_P.jpg
Biochip Microscope Frame (P)

Non-heated Manual Microscope Stage

96-well plate compatible

Compatible with Cellix's biochip range.

Compatible with Olympus* and EVOS manual-stage microscopes.

Includes frame base, top cover and Eppendorf holder.

Frame material is anodized aluminium.

​

*Olympus stage is not flat and has 2 guides which move.  Frame P sits on top of stage and connects to 2 guides.

Read More

DROPLET GENERATION REAGENTS

DROPGEN-OIL-SURF-10mL.jpg
Oil & Surfactant Solution

Droplet Generation
10mL/bottle

Product Code:  

DROPGEN-OIL-SURF-10

DROPGEN-OIL-SURF-50mL.jpg
Oil & Surfactant Solution

Droplet Generation
50mL/bottle

Product Code:  

DROPGEN-OIL-SURF-50

DROPGEN-CHIP-PRECOAT-2.5.jpg
Chip Pre-coating Solution

Droplet Generation
2.5mL/bottle

Product Code:  

DROPGEN-CHIP-PRECOAT-2.5

Droplet Generaton Reagents

PUMP ACCESSORIES

Flow Sensor_2.jpg
Flow Sensors

Stable Flow

Accurate Flow Rate Delivery

Active feedback and PID control.

Compatible with ExiGo, UniGo and 4U pumps.

Read More
Comperssor_thumbnail.jpg
External Compressor

Pressure Pump Source

Pressurized air

Compatible with UniGo and 4U pumps.

Read More
ExiGo Manifold.jpg
Pump Manifold

3-Way Valve

Accurate Flow Switching

Inject reagents into 3 different channels at different times.

Automatic refilling of syringe.

Compatible with ExiGo syringe pump.

Read More
Mirus Evo Pump Syringe_500uL.jpg
Syringes

Glass Syringes

Syringe pump compatible

100µL, 250µL, 500µL, 1mL and 5mL syringes.

Compatible with Mirus syringe pump.

Read More
Pump Accessories
Sample Reservoirs & Holders

SAMPLE RESERVOIRS & HOLDERS

PRESSURE PUMPS
15mL Sample Reservoir.jpg
15mL Sample Reservoir

Reservoir for Pressure Pumps

Compatible with UniGo/4U

Compatible with 15mL Sarstedt tubes and 1mL or 2mL Eppendorf tubes.

Plug-and-play interface.

Suitable for droplet generation, cell culture and autoclavable.

Free-standing or optical table mount.

Read More
PRESSURE PUMPS
1.5-2.0mL Eppendorf Reservoir-Injector component with eppendorf (18).jpg
Eppendorf Reservoir

Reservoir for Pressure Pumps

Compatible with UniGo/4U

Compatible with 1mL or 2mL Eppendorf tubes.

Plug-and-play interface.

Suitable for droplet generation, cell culture and autoclavable.

Read More
PRESSURE PUMPS
Kima Cell Culture Bottle.jpg
Cell Culture Bottle

Long term cell culture

Organ-on-chip & media recirculation

GL45 Glass bottle with plastic cap.

Connect to Cellix's pumps for cell culture or organ-on-chip studies.

Connect to Kima pump for media recirculation in microfluidic chips.

Plug-and-play interface and autoclavable.

Product Code:  CC-BOTTLE

Read More
PRESSURE PUMPS
Eppendorf Holder.jpg
Eppendorf Holder

Holds 2 Eppendorfs

Sample Reservoir Holder

Magnetic bottom for easy placement on microscope stage.

Read More
Accessories query
bottom of page