15mL Sample Reservoir
Sample injection for microfluidic applications
FAST SET-UP: Apply pressure from UniGo or 4U pump. Connect 1/32" or 1/16" tubing from reservoir-to-chip.
EASY TO USE: plug-and-play interface. No need to screw in cap, just plug in the tube. Seal achieved with flexible o-ring.
MODULAR: up to 2 sample reservoirs - run experiments in parallel.
COMPATIBLE WITH CELL CULTURE AND AUTOCLAVABLE.
WORKING PRESSURE UP TO 7 BAR / 101 PSI OR VACUUM -0.9BAR.
VERSATILE: Choose 1/32" ID tubing to minimise volume from tube-to-chip (64um ID to 250um ID available).
EPPENDORF COMPATIBLE: Compatible with 15mL Sarstedt tubes, 1mL or 2mL Eppendorf tubes.
HOW DOES IT WORK?
Example Set-up: Sample Reservoir connected to UniGo pump
Example Set-up: 2x Sample Reservoirs connected to all 4 channels of the 4U pump
Compatible with Eppendorf tubes
Cut the lid off the Eppendorf and drop into the 15mL Sarstedt tube
Cut the lid off the Eppendorf and drop into the 15mL Sarstedt tube
APPLICATIONS
-
Thrombosis / Platelet Adhesion and Aggregation shear flow experiments.
-
Shear based cell rolling, adhesion and transmigration assays on ligand-coated surface or on endothelial cells.
-
Cell and particle manipulation
-
Precise multichannel mixing, multilaminar flow studies
-
Droplet Generation
-
Hydrodynamic flow focusing
APPLICATION VIDEOS
RELATED PRODUCTS
UniGo Pressure Pump
4U Pressure Pump
Flow Sensors
