Tubing & Connectors
Tubing and connectors for our microfluidic pumps and biochips
Assembled Tubing with Connectors
Plug & Play
Pump to Microfluidic Chip
Pack of 10 disposable inlet tubes.
Connects pump to inlet of Cellix's biochips.
Tubing length: 10cm
Tubing: Tygon
ID: 0.4318mm, OD: 2.2098mm
Pump luer connectors: Plastic with pin
25G; ID: 0.305mm, OD: 0.510mm
Biochip connector pins: Stainless steel
25G; ID: 0.305mm, OD: 0.510mm
Product Code: BIOCHIP-CONNECT-B1ICPACK10
Plug & Play
Pump to Microfluidic Chip
8-way splitter with tubing for pump.
Product Codes:
8-WAY-SPLITTER-TUBING
Plug & Play
Pump to Microfluidic Chip
Pack of 10 disposable outlet tubes.
Connects from outlet of Cellix's biochips to waste or eppendorf.
Tubing length: 10cm
Tubing: Tygon
ID: 0.4318mm, OD: 2.2098mm
Biochip connector pins: Stainless steel
25G; ID: 0.305mm, OD: 0.510mm
Product Code: BIOCHIP-CONNECT-B1OCPACK10
Plug & Play
Pump to Microfluidic Chip
4-way splitter with tubing for pump.
Product Codes:
4-WAY-SPLITTER-TUBING
Plug & Play
Pump to Microfluidic Chip
Pack of 10 disposable pre-assembled single inlet cables to connect from output cable of Mirus Evo Nanopump to the single inlet cable of the biochip.
Prevents blood from going into the Mirus Evo Nanopump - usually used for thrombosis experiments.
Tubing lengths:
24" (~61cm)
48" (~122cm)
Product Codes:
BIOCHIP-CONNECT-THROMBOSIS24-IC-PACK10
BIOCHIP-CONNECT-THROMBOSIS48-IC-PACK10
Tubing
Do-It-Yourself
Tubing for manual assembly
Tubing: Tygon
ID: 0.4318mm, OD: 2.2098mm
Product Code: TUBING-TYGON-BIC1OCROLL
Connectors
Do-It-Yourself
Connectors for manual assembly
Pack of 100.
Connectors with stainless steel pins for connection of syringe outlet to tubing.
Material: Plastic with pin
25G; ID: 0.305mm, OD: 0.510mm
Product Code: CONNECTORS-B1IC-PACK100
Do-It-Yourself
Nozzles for manual assembly
Pack of 8.
Replacement nozzles for Multiflow8 manifold. Suitable for thrombosis applications.
Product Code:
MF8N2-THROMBOSIS-PACK8
Do-It-Yourself
Pins for manual assembly
Pack of 200.
Stainless steel pins for manual assembly of biochip single inlet and outlet tubes.
Biochip connector pins: Stainless steel
25G; ID: 0.305mm, OD: 0.510mm
Product Code: SS-P-B1IC-B1OC-PACK200
Do-It-Yourself
Nozzles for manual assembly
Pack of 8.
Replacement nozzles for Multiflow8 manifold. Standard nozzles.
Product Code: MF8N1-PACK8