TUBING AND CONNECTORS

Tubing and connectors to fit with Cellix products. 

100 FT TYGON TUBING

Roll of Tygon Tubing for manual assembly of Biochip-Connect single inlet and outlet cables. Supplied as a 100ft roll. 

 

Material: Tygon

ID: 0.439mm 

OD: 2.268mm 

Product Code: TUBING-TYGON-BIC-B1OCROLL

 

What's in the box? 1 x 100 ft Tygon tubing for biochip connect single cables.

INLET CONNECTORS

Connectors with stainless steel pins for manual assembly of Biochip-Connect inlet cables. Supplied as pack of 100.

Material: Plastic and stainless steel

Inlet pins ID: 0.3mm

Inlet pins OD: 0.5144mm 

Product Code: CONNECTORS-B1IC-PACK100

What's in the box? 100 x Connectors for single inlet cables of biochips.

OUTLET PINS

Stainless steel pins for manual assembly of Biochip-Connect inlet and outlet cables. Supplied as pack of 200. 

Material: Stainless steel

Inlet pins ID: 0.3mm

Inlet pins OD: 0.5144mm 

Product Code: SS-P-B1IC-B1OC-PACK200

What's in the box? 200 x Pins for single inlet and outlet cables of biochips.

BIOCHIP CONNECT - SINGLE INLET CABLE

Single inlet cable to connect from Cellix's microfluidic pumps to the inlet of the biochip. The inlet cable is 10cm long. Pack of disposable pre-assembled single inlet cables to connect from Cellix's microfluidic pumps to the inlet of the biochip.

Material: Stainless steel inlet needles/ pins

ID: 0.3mm OD: 0.5144mm 

Material: Plastic with stainless steel pins - Luer connection to pump

ID: 0.3mm OD: 0.5144mm 

Material: Plastic with stainless steel pins - Luer connection to pump

ID: 0.439mm  OD: 2.268mm 

Product Code: BIOCHIP-CONNECT-B1ICPACK10

What's in the box? 10 x Biochip-Connect Biochip Single Inlet Cable.

BIOCHIP CONNECT - SINGLE OUTLET CABLE

The outlet cable is 10cm long. Pack of disposable pre-assembled single outlet cables to connect from outlet of the biochip to an eppendorf for waste or sample collection.

Material: Stainless steel

ID: 0.3mm OD: 0.5144mm 

Material: Tygon

ID: 0.439mm OD: 2.268mm 

Product Code: BIOCHIP-CONNECT-B1OCPACK10

What's in the box? 10 x Biochip-Connect Biochip Single Outlet Cable

KIMA CONNECT

Kima Connect is the complete set of tubings for the Kima™ pump. Contains:

  • 2 pump priming cables

  • 1 pump inlet cable

  • 1 pump outlet cable

  • 1 biochip outlet cable

Wash Tubing & Chip Outlet Tubing Material: Silicone ID: 0.3mm OD: 0.5144mm 

Pump and Chip Inlet Tubing Material: PTFE 

ID: 1mm OD: 1.6mm

Gripper Nuts: 1/4"-28 UNF (thread)

Product Code: KIMA-CONNECT-SET1

What's in the box? Complete set of tubings for Kima pump.  Contains 2 pump priming cables; 1 pump inlet cable; 1 pump outlet cable and 1 biochip outlet cable.

MIRUS CONNECT

Mirus Connect is the complete set of tubings for the Mirus™ Evo Nanopump. Contains:

  • 1 pump inlet cable

  • 1 pump outlet cable

  • 1 pump-to-MultiFlow8 cable

Wash Tubing & Chip Outlet Tubing Material: Silicone ID: 0.3mm OD: 0.5144mm 

Pump and Chip Inlet Tubing Material: PTFE 

ID: 1mm OD: 1.6mm

Gripper Nuts: 1/4"-28 UNF (thread)

Product Code: MIRUS-EVO-CONNECT-SET1

What's in the box? Complete set of tubings for Mirus Evo Nanopump.  Contains 1 pump inlet cable, 1 pump outlet cable and 1 pump-to-MultiFlow8 cable.

MULTIFLOW8 CONNECT

MultiFlow8 Connect is the complete set of tubings to connect the MultiFlow8 (part of Mirus™ Pro) to Vena8 biochips. Includes 8 assembled tubes to connect from the MultiFlow8 of the Mirus Evo Nanopump to the inlet of the Vena8 biochip.

Tubing: Tygon ID: 0.439mm OD: 2.268mm 

8 Way Connectors/ Pins: Stainless steel

ID: 0.3mm OD: 0.5144mm

Product Code: MF8-CONNECT-BIC1

What's in the box? This cable contains 8 assembled tubes to connect from the MultiFlow8 of the Mirus Evo Nanopump to the inlet of the biochip.  No nozzles included; these are already on the MultiFlow8.  This will only need to be replaced after wear and tear which is typically every 6 months depending on system usage and maintenance.

MULTIFLOW8 NOZZLES

MultiFlow8 Nozzles - standard replacement nozzles for MultiFlow8 manifold.

Material: Stainless steel 

ID: 0.2mm OD: 0.8mm 

Product Code: MF8N1-PACK8

What's in the box? 8 x MultiFlow8 Nozzles, standard.

MULTIFLOW8 NOZZLES FOR THROMBOSIS

Replacement nozzles for MultiFlow8 manifold for thrombosis applications.

Material: Stainless steel 

ID: 0.2mm OD: 0.8mm 

Product Code: MF8N2-THROMBOSISPACK

What's in the box? 8 x MultiFlow8 Nozzles for thrombosis experiments.

 

Use this form to request more information, including our price list. 

© 2017 By Cellix Ltd. Created by Teach a Brand to Fish.

info@wearecellix.com | Unit 1, Longmile Business Park, Longmile Road, Dublin 12, Ireland

  • Twitter Social Icon
  • LinkedIn Social Icon
  • YouTube Social  Icon